Question 3004 of 790 · California General Electrician Exam
A series combination rating may not be used when motors connected between the two devices contribute more than what percentage of the lower-rated breaker's interrupting rating?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 3004
- D: 1 percent
Explanation
Series ratings are not allowed where motors connected between the higher-rated OCPD and the lower-rated breaker have full-load currents totaling more than 1 percent of the interrupting rating of the lower-rated breaker. See 240.86(C).
More questions: Feeders and Overcurrent Protection
- 3005When may a feeder OCPD be sized at 100 percent of the continuous load?
- 3006In which case is the next size up rule not permitted?
- 3007The available fault current at a panelboard is 18,000 A. Which breaker interrupting rating is acceptable?
- 3008What is the maximum rating of a plug fuse?
- 3009A feeder is protected at 400 A. What is the minimum copper THWN tap conductor at 75 degrees C for a 25 ft tap?
- 3010What is the maximum height of the center of the operating handle of a circuit breaker in its highest position?