Question 13013 of 790 · California General Electrician Exam
A motor takes 20 kW of electrical input and operates at 90 % efficiency. What is its output in horsepower?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 13013
- A: 24.1 hp
Explanation
Output power is 20,000 W x 0.90 = 18,000 W, and 18,000 / 746 = 24.1 hp. Ignoring efficiency gives 26.8 hp, and dividing by the efficiency gives 29.8 hp.
More questions: Electrical Calculations
- 13014A three-phase 460 volt motor delivers 25 hp with an efficiency of 92 % and a power factor of 0.86. What is the actual line current (not the NEC table value)?
- 13015A single-phase 240 volt load draws 50 amperes, and a wattmeter reads 10.2 kW. What is the power factor?
- 13016A 5 kW resistance heater runs 8 hours per day. At $0.12 per kWh, what does one day of operation cost?
- 13017A 15 kW balanced three-phase resistive heater is connected to 208 volts. What is the line current?
- 13018A 120/240 volt single-phase 3-wire feeder carries 40 A on one ungrounded conductor and 25 A on the other. Assuming linear loads, what current flows in the neutral?
- 13019A 3-phase 4-wire wye feeder has linear loads of 50 A on phase A, 40 A on phase B and 30 A on phase C. What is the approximate neutral current?